The Master Science Mould Incubator is designed for growing and screening moulds, fungal spores and other microorganisms that need steady, moderate temperatures. Its range of 4 to 60°C covers both cool and warm culture conditions, with ±0.5°C fluctuation and ±1°C uniformity.
Air is drawn in at the back and supplied from the bottom by a large-impeller fan, and laser-perforated shelves let it pass evenly around plates and flasks. A UV disinfection lamp and an LED light are fitted at the top of the chamber, and a viewing window in the door lets you check cultures without opening it. Four sizes are available from 150 to 450 litres.
Technical Specifications
Specifications of the Master Science Mould Incubator range:
- Brand: Master Science
- Model Number: MSICB-M150ZSWISS,MSICB-M250ZSWISS,MSICB-M350ZSWISS,MSICB-M450ZSWISS
- SKU: MSICB-M150ZSWISS,MSICB-M250ZSWISS,MSICB-M350ZSWISS,MSICB-M450ZSWISS
- Brand: Master Science
- Model: MSICB-M150ZSWISS, MSICB-M250ZSWISS, MSICB-M350ZSWISS, MSICB-M450ZSWISS
- SKU: MSICB-M150ZSWISS, MSICB-M250ZSWISS, MSICB-M350ZSWISS, MSICB-M450ZSWISS
- Capacity: 150 / 250 / 350 / 450 L
- Circulation: Forced air convection
- Internal dimensions (W×D×H): 505 × 380 × 800 / 550 × 450 × 1050 / 550 × 550 × 1150 / 700 × 550 × 1200 mm
- External dimensions (W×D×H): 630 × 600 × 1450 / 680 × 660 × 1710 / 680 × 770 × 1870 / 830 × 750 × 1860 mm
- Temperature range: 4-60°C
- Fluctuation: ±0.5°C
- Resolution: 0.1°C
- Uniformity: ±1°C
- Sensor: PT100
- Controller: PID
- Display: LCD
- Timer: 1-9999 min
- Chamber: Brushed stainless steel
- Exterior: Electro-galvanized steel, antimicrobial powder coating
- Shelves: 3 or 4 depending on size, adjustable
- Lighting and disinfection: LED light and UV lamp at chamber top
- Test port: Optional Ø25, 50, 80 or 100 mm
- Safety: Leakage protector; over-temperature sound and light alarm; self-diagnosis
- Power supply: 220 V, 50 Hz
- Power consumption: 900 / 1000 / 1100 / 1600 W
- Weight: 120 / 140 / 170 / 200 kg
Key Benefits
- Built for fungi: The Master Science Mould Incubator holds 4-60°C for mould screening and spore culture.
- Keeps the chamber clean: A UV lamp disinfects between runs.
- Watch cultures through the door: The built-in window avoids unnecessary openings.
- Even growth on every shelf: Back-suction, bottom-supply airflow and perforated shelves.
For BOD work with in-chamber instruments, see our BOD cooling incubator with internal socket next to the Master Science Mould Incubator.
Product Features
Temperature control
- PT100 sensor with PID control
- Adaptive control that adjusts to ambient and load
- Silicone door seal to limit heat loss
Operation
- High-definition LCD with screen lock
- Menu operation for temperature and time
- Fixed-value and timed running with END alert
- Self-diagnosis with fault display
Chamber
- Brushed stainless steel interior
- Laser-perforated shelves, 30 mm minimum spacing
- LED light and UV disinfection lamp
- Viewing window and anti-scald handle
Applications
The Master Science Mould Incubator is used for:
- Mould screening and identification
- Fungal spore culture
- Microbial tissue and cell culture
- Food and drug preservation tests
- Seed germination studies
Standard Accessories Included
- Mould incubator
- Shelves (3 or 4 depending on size)
Optional Accessories
- Independent temperature limiting controller
- Programmable LCD controller with USB, RS485/232 or printer
- Test port Ø25, 50, 80 or 100 mm
Culture Problems the Master Science Mould Incubator Solves
General incubators often struggle with cool-temperature fungal work and contamination. The Master Science Mould Incubator addresses:
- Unstable low temperatures: Active control holds settings down to 4°C.
- Cross-contamination between batches: The UV lamp disinfects the chamber.
- Disturbing cultures to check them: The viewing window shows plates without opening.
- Hot spots in the chamber: Engineered airflow keeps temperature even.