LED Hot Plate - 550°C Laboratory Hotplate - 184 mm Glass Ceramic Plate - PT1000 Sensor Input

The Master Science 550°C LED Hot Plate is a single-position laboratory heater with a 184 × 184 mm glass ceramic work plate. The glass ceramic surface resists chemicals and transfers heat efficiently, and the plate can be set from room temperature up to 550°C in 5°C steps.

An LED display shows the temperature, and an external PT1000 probe can be connected for direct control of the sample temperature with ±0.5°C accuracy. A separate safety circuit with a fixed 580°C limit and a flashing HOT warning above 50°C, even after switch-off, make the Master Science 550°C LED Hot Plate safe for daily use.

Technical Specifications

Technical data of the Master Science 550°C LED Hot Plate:

• Brand: Master Science
• Model Number: MSHPT-550SWISS
• SKU: MSHPT-550SWISS
• Brand: Master Science
• Model: MSHPT-550SWISS
• SKU: MSHPT-550SWISS
• Work Plate: 184 × 184 mm (7 inch), glass ceramic
• Heating Positions: 1
• Temperature Range: Room temperature to 550°C, 5°C increments
• Plate Control Accuracy: ±10°C
• Safety Temperature: 580°C (fixed)
• Display: LED, ±1°C
• External Sensor: PT1000 (±0.5°C)
• Hot Warning: Above 50°C
• Heating Power: 1000 W
• Total Power: 1010 W
• Voltage: 100-120 / 200-240 V, 50/60 Hz
• Protection Class: IP21
• Dimensions (W × D × H): 215 × 360 × 112 mm
• Net Weight: 4.5 kg
• Ambient Conditions: 5 to 40°C, up to 80% RH

Key Benefits

• High temperature: Heats up to 550°C for digestion, evaporation and drying.
• Chemical-resistant top: Glass ceramic plate withstands spills and transfers heat well.
• Precise sample control: External PT1000 probe controls the liquid temperature directly.
• Built-in safety: Independent 580°C cut-out and residual heat warning.

For heating with stirring, see our hotplate magnetic stirrer.

Product Features

Heating

• 184 × 184 mm glass ceramic work plate
• Up to 550°C in 5°C steps
• 1000 W heating power

Control and Display

• LED temperature display
• PT1000 external probe input, ±0.5°C

Safety

• Separate safety circuit fixed at 580°C
• Flashing HOT warning above 50°C, even when switched off
• IP21 protection

Applications

The Master Science 550°C LED Hot Plate is used for:

• Heating solutions and samples in beakers and flasks
• Sample digestion and evaporation
• Drying and ashing preparation
• Chemistry teaching and research laboratories
• Quality control and environmental labs

Standard Accessories Included

• Hot plate main unit

Optional Accessories

• PT1000 external temperature sensor

Problems the Master Science 550°C LED Hot Plate Solves

Basic hot plates can overheat or leave operators guessing. The Master Science 550°C LED Hot Plate helps with:

• Uncertain sample temperature: An external PT1000 probe controls the liquid directly.
• Corroded heating surfaces: Glass ceramic resists chemicals.
• Accidental burns: The HOT warning flashes while the plate is still hot.
• Runaway heating: An independent safety circuit cuts out at 580°C.