Flame Photometer - Touch Screen Flame Photometer for K Na Li Ca Ba - 7-inch Display - <8 s Response

The Master Science Flame Photometer is a series of six instruments for determining alkali and alkaline-earth metals by flame emission. Depending on the model, it measures two to five elements from potassium, sodium, lithium, calcium and barium.

Operation is through a 7-inch colour touch screen with push-button ignition. The burner runs on LPG with air from the supplied compressor, flame size can be pre-selected, and a protection device acts if the flame goes out.

Technical Specifications

Specifications of the Master Science Flame Photometer:

• Brand: Master Science
• Model Number: MSFP-I6450SWISS, MSFP-I6440SWISS, MSFP-I6431SWISS, MSFP-I6430SWISS, MSFP-I6410SWISS, MSFP-I640SWISS
• SKU: MSFP-I6450SWISS, MSFP-I6440SWISS, MSFP-I6431SWISS, MSFP-I6430SWISS, MSFP-I6410SWISS, MSFP-I640SWISS
• Brand: Master Science
• Model Number: MSFP-I6450SWISS, MSFP-I6440SWISS, MSFP-I6431SWISS, MSFP-I6430SWISS, MSFP-I6410SWISS, MSFP-I640SWISS
• SKU: MSFP-I6450SWISS, MSFP-I6440SWISS, MSFP-I6431SWISS, MSFP-I6430SWISS, MSFP-I6410SWISS, MSFP-I640SWISS
• Elements, MSFP-I6450SWISS: K, Na, Li, Ca, Ba
• Elements, MSFP-I6440SWISS: K, Na, Li, Ca
• Elements, MSFP-I6431SWISS: K, Na, Ca
• Elements, MSFP-I6430SWISS: K, Na, Li
• Elements, MSFP-I6410SWISS and MSFP-I640SWISS: K, Na
• Range (ppm): K 0.15-100; Na 0.18-100; Li 0.1-30; Ca 0-1000; Ba 0.1-300
• Limit of Detection (ppm): K ≤0.156; Na ≤0.184; Li ≤0.1035; Ca ≤2; Ba ≤6.028
• Linear Error: K ≤0.195; Na ≤0.69; Li ≤0.1449; Ca ≤3; Ba ≤9.402
• Operation: 7-inch colour touch screen
• Displayed Value: Concentration (optical power on MSFP-I640SWISS)
• Response Time: <8 s
• Sample Uptake: <3 mL/min
• Stability: <3% (15 s); ≤15% (6 min)
• Reproducibility: ≤2%
• Memory: 20 standard curves and 20 sets of test data
• Fuel: LPG
• Power: AC 220 V ±10%, 50 Hz ±1 Hz, 30 W
• Package Dimensions: 570 × 530 × 400 mm
• Gross Weight: 18 kg

Key Benefits

• Simple start-up: the Master Science Flame Photometer lights with one button.
• Safe burner: flameout protection device.
• Fast readings: response in under 8 seconds.
• Ready-made calibration: correlation coefficient calculated automatically on concentration models.
• Complete package: air compressor supplied.

For trace metals at lower levels, see the Master Science atomic absorption spectrophotometer.

Product Features

Operation

• 7-inch colour touch screen
• Multilingual user interface
• Selectable concentration units
• Measuring range changing

Flame

• Push-button ignition
• Pre-selection of flame size
• Pressure gauge on the front panel

Data

• Direct concentration display and curve graph (not on MSFP-I640SWISS)
• USB output (not on MSFP-I640SWISS)
• Storage of standard curves and test data

Applications

The Master Science Flame Photometer is used for:

• Potassium and sodium determination
• Lithium, calcium and barium determination on the corresponding models
• Routine element analysis of liquid samples

Standard Accessories Included

• Air compressor

Optional Accessories

• Built-in thermal printer (not for MSFP-I640SWISS)

Common Problems and How This Photometer Helps

How the Master Science Flame Photometer eases flame emission analysis:

• Difficult manual ignition: push-button start.
• Gas flowing after the flame dies: flameout protection.
• Hand-drawn calibration curves: stored curves with automatic correlation coefficient.
• Paying for elements never measured: six models from two to five elements.