The Blood Gas and Electrolyte Analyzer measures pH, pCO2, pO2, K+, Na+, Cl-, ionized Ca++ and Hct from 95 µL of whole blood or 50 µL of capillary blood, with results in under 90 seconds. It also accepts serum, plasma, dialysate and cerebrospinal fluid and calculates parameters such as HCO3, TCO2, base excess, SO2%, anion gap and AaDO2.
A disposable calibrant cartridge holds flush solution, mixed gas, liquid calibrants and the waste container, which reduces biohazard exposure for operators. The Blood Gas and Electrolyte Analyzer runs from a 10.4-inch touch screen with on-screen tutorials, reads barcodes, prints on a built-in 70 mm thermal printer and connects to a LIS under HL7.
Technical Specifications
undefined
- Brand: Master Science
- Model Number: MSBGA-95-8SWISS
- SKU: MSBGA-95-8SWISS
- Measured Parameters: pH, pCO2, pO2, K+, Na+, Cl-, Ca++, Hct
- pH Range: 6.000-9.000
- pCO2 Range: 5.0-200.0 mmHg (0.667-26.67 kPa)
- pO2 Range: 0-800.0 mmHg (0-106.7 kPa)
- K+ Range: 0.50-10.00 mmol/L
- Na+ Range: 50.0-200.0 mmol/L
- Cl- Range: 20.0-200.0 mmol/L
- Ca++ Range: 0.10-5.00 mmol/L
- Hct Range: 12.0-65.0%
- Barometric Pressure: 500-800 mmHg
- Calculated Parameters: pH/pCO2/pO2 (TC), TCO2, HCO3, BEb, BEecf, SBC, SO2%, Ca++(7.4), TCa, AG, RI, AaDO2, O2SAT, tHb(c)
- Sample Types: Whole blood, serum, plasma, dialysate, CSF
- Sample Volume: 95 µL whole blood; 50 µL capillary blood
- Analysis Time: < 90 s from aspiration; < 120 s sample to sample
- Input Parameters: Patient temperature, hemoglobin, FiO2, barometric pressure
- Calibration: Automatic, programmable 1-point and 2-point
- Calibrant Cartridge: Test volumes 300/200/150/100/50; 30 days on board; room-temperature storage
- Display: 10.4-inch TFT touch screen
- Data Storage: > 10,000 results
- Printer: Built-in 70 mm thermal printer
- Barcode Reader: Integrated, up to 14 barcode types
- Interfaces: RS-232, TCP/IP, USB; LIS under HL7
- Battery: Ni-MH, 3.0 Ah
- Dimensions (W × H × D): 400 × 574 × 344 mm
- Calibrant Pack Size (W × H × D): 258 × 180 × 70 mm
- Auto QC Cartridge Size (W × H × D): 103 × 180 × 70 mm
- Weight: 30 kg
- Operating / Storage Temperature: 15-30°C / 5-40°C
- Power Supply: 100-240 V, 50/60 Hz
Key Benefits
- Small Sample Volume: Only 95 µL of whole blood or 50 µL of capillary blood is needed.
- Safer Waste Handling: Waste is collected inside the disposable calibrant cartridge.
- Less Maintenance: Long-life, maintenance-free electrodes and an all-in-one cartridge reduce routine work.
- Built-In Quality Control: An optional Auto QC cartridge runs three QC levels automatically and stops testing after a failed QC.
For electrolyte-only testing, see our ISE Electrolyte Analyzer, which complements the Blood Gas and Electrolyte Analyzer.
Product Features
Touch Screen Interface
- 10.4-inch high-resolution touch screen
- Status area shows analyzer condition at a glance
- Online operation and self-diagnostic tutorials
- Infrared operator detection
Calibrant Cartridge
- Contains flush solution, mixed gas, liquid calibrants and waste container
- Test volume options: 300, 200, 150, 100 or 50
- 30 days on board, stored at room temperature
- Expiration alarm and remaining-test display
Measurement Unit
- Long-life, maintenance-free electrodes
- Preheats reagents and sample
- Sample adaptor for syringe and capillary samples
- Probe wiper for sample integrity and user safety
Data Management
- Barcode input for sample, patient and consumables
- RS-232, TCP/IP and USB backup
- LIS connection under HL7
- Ni-MH battery, 3.0 Ah
Applications
undefined
- Arterial blood gas analysis in ICU and emergency departments
- Acid-base and oxygenation assessment
- Electrolyte and ionized calcium testing at the point of care
- Hematocrit measurement during surgery
- Dialysate and CSF analysis
Standard Accessories Included
- Blood gas and electrolyte analyzer main unit
- Built-in thermal printer
- Integrated barcode reader
Optional Accessories
- Auto QC cartridge with three QC levels
- Calibrant cartridges in 300, 200, 150, 100 or 50 test sizes
Problems the Blood Gas and Electrolyte Analyzer Solves
Critical-care labs meet the issues below. The Blood Gas and Electrolyte Analyzer addresses each one.
- Large blood draws from neonates and ICU patients: Only 95 µL of whole blood or 50 µL capillary blood is needed.
- Biohazard from liquid waste: Waste stays sealed in the disposable cartridge.
- Frequent electrode maintenance: Long-life electrodes are maintenance-free.
- QC runs forgotten: The optional Auto QC cartridge runs three levels on a schedule.
- Manual entry errors: Barcode input and LIS connection under HL7 cut typing.